Coo-Var Power Floated Floor Primer

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Should there be any residual laitance present then this must be removed. This should be done chemically using Coo-Var Acid Etch (see Acid Etch data sheet for details). New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrates. If in doubt please contact us, 01942 884122

Mixing Instructions

You should have two containers: one larger than the other and labelled Hardener. The other smaller one labelled Base. The contents of the pack marked Base are added to the contents of the larger pack marked Hardener and thoroughly mixed together, preferably by slow speed electric mixer. After mixing, add up to 500 mls clean tap water to the 5 kilo unit and mix again. This will make up one 5 kilo unit.

Application Conditions

As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10 °C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Apply Direct

Subsequent Coat

Coo-Var Profloor Floor Paint, Coo-Var Profloor Plus

Estimated Coverage

7 to 10sqm per kg