Carbolin Raw Linseed Oil

Apply minimum 3 coats leaving 24 hours between each coat and a 7-14 allow 7 days (or until dry) after the final coat before using treated item

For best results on new woods, dilute the first two coats with 30% Turps/White Spirit

Can also be used to soften putty and as a lubricant for French Polishing

Mainly used for internal purposes but if used outside, we recommend a prior application of wood preservative treatment that must be allowed to dry before applying Raw Linseed Oil. Regular retreatment will be required.

Preparation and method of application are essential for great results:

Shake oil well before use. Keep container upright at all times
Ensure wood to be treated is dry, free from dirt and repellant coatings such as wax, paint and varnish (remove and sand down as required).
Wipe oily woods with White Spirit before application
Apply by brush or lint free cloth – after 10-15 minutes, remove excess oil with a lint free cloth
Clean equipment with White Spirit
Precaution: cloths used for oiling may spontaneously combust. Immediately after use, soak them in soapy water then lay them flat outside on a non-combustible surface to dry