Teamac Bilge & Locker Paint

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Surfaces have to be prepared and primed with the suitable primer for that substrate. Use direct on GRP. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Teamac Wood Primer on wood, Teamac Zinc Phosphate Metal Primer on ferrous metals.

Subsequent Coat

Teamac Bilge Paint

Estimated Coverage

9 – 11sqm per litre