Teamac Marine Primer Undercoat

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Wood should be sanded prior to coating to ensure an adequate “key” is produced. Apply direct to abraded GRP. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Direct to wood, metal and GRP.

Subsequent Coat

Teamac Marine Gloss or any suitable, conventional white spirit based topcoats.

Estimated Coverage

13sqm per litre