Teamac Marine Satin

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Surfaces have to be prepared and primed with the suitable primer for that substrate. Can be used directly on GRP. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use.

Application Conditions

As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying

Preceding Coat

Can be applied directly to prepared GRP, iron or steel. For greater protection prime with Teamac Zinc Phosphate Metal Primer. On wood use Teamac Wood Primer.

Subsequent Coat

Teamac Marine Satin Finish

Remarks

Satin finish.

Estimated Coverage

13sqm per litre