Product Description
Teamac Micaceous Iron Oxide is an anti-corrosive undercoat for steel surfaces. It protects the steel from rust, especially in coastal areas where corrosion is more likely to occur.
After applying, Teamac Micaceous Iron Oxide can be overcoated, or left as a matt finish.
Touch dry in 2 to 4 hours and hard dry in 16 to 24 hours. Leave 16 hours and no more than 10 days before overcoating.
Container size: 5 Litre
For full details, please see the datasheets or contact us via the online chat, phone or email for any questions about this item or to check stock.
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with Coo-Var Universal Degreaser before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Mixing Instructions
Stir well before use – DO NOT THIN.
Application Conditions
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
Preceding Coat
Teamac Zinc Rich or Teamac Zinc Phosphate Primer.
Subsequent Coat
Suitable topcoat including Teamac Marine Gloss, Teamac Metalcote. Can be left as a finishing coat.
Remarks
75% total weight solids.
Estimated Coverage
6 to 8sqm per litre
Reviews
There are no reviews yet.